NAC Image Technology MC-529, User Manual

Page: 57 / 180

(00235) 3-5
3.2 Recording Settings
Settings related to recording in Table 3-2 and Table 3-3 are described below.
3.2.1 Trigger Timing Selection (TRIGGER)
While in the VIEW mode, the trigger timing can be selected using the VIEW MENU on the J-PAD3. The
trigger timing can also be selected with the direct key.
With trigger timing, the number of recorded frames from the start of recording to the trigger input, and the
ratio of recorded frames from the trigger input to the end of recording can be set.

Start Trigger (START)

Center Trigger (CENTER)

End Trigger (END)

Custom Trigger (+000%)
1) While in the VIEW mode, press MENU to display the
VIEW MENU.
2) Select "TRIGGER" from the VIEW MENU using the arrows
(Figure 3-4).
3) Use the arrows to select the trigger timing.
START Start trigger
CENTER Center trigger
END End trigger
+000% Custom trigger
-
ⅰ
) If selecting custom trigger, use the cursor and press SET .
-
ⅱ
) Move using the arrows and use arrows to change the numerals (-100~+100).
-
ⅲ
) Press SET again to set the trigger timing.
Selection of trigger timing using the direct key is possible when the status screen is displayed in the
STOP mode or the VIEW mode.
The custom trigger setting values cannot be changed with the direct key.
Figure 3-4 TRIGGER