NAC Image Technology MC-529, User Manual

Page: 98 / 180

(00235) 3-46
3.2.20 Exposure Timing Selection (EXP TIME)
While in the STOP mode, the sensor exposure timing for synchronized signal recording can be selected
from the SYS MENU on the J-PAD3.
The sensor exposure timing for synchronized signal recording is different depending on the MEMRECAM
GX-3 or other MEMRECAM series cameras (fx,ci cameras). When conducting synchronized recording with
the MEMRECAM GX-3 and other MEMRECAM series cameras, the exposure timing for all of the cameras
must be coordinated.
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SYS MENU" from the TOP
MENU and press SET to display the SYS MENU.
3) Use the arrows to select "EXP TIME" from the SYS
MENU. (Figure3-52)
4) Use the arrows to select the exposure time.
GXnative Start exposure with rising synchronized signal recording
(Setting only when recording in GX-3)
K3compat End exposure with rising synchronized signal recording
(Setting only with synchronized recording with fx series
cameras other than fx-K4 and K5)
K4compat End exposure with rising synchronized signal recording
(Setting for synchronized recording with fx-K4 and K5)
CAUTION
）
Refer to a
【
GXLink User's Manual
】
for the synchronized recording by the multi-camera
connection between MEMRECAM GX-3 and other MEMRECAM series cameras.
Figure3-52 EXP TIME