NAC Image Technology MC-529, User Manual

Page: 43 / 180

(00235) 2-15
2.8.1 Single Frame Playback (PLAY Mode)
■
Single Frame Playback Method
Press PLAY . Or press the dial
（ ）
.
During the STOP mode, press J-PAD3 PLAY or press the dial ( ) to access the PLAY mode
(Figure 2-20, 21). Recorded images are played back in single frames. With single frame playback, the set
playback range is only played back one time.
To stop single frame playback, play until the final frame or press STOP
.
■
Image Display
In the PLAY mode, the recorded image is played
back by single frames. Information is superimposed
at the bottom and top of the screen and the camera
mode (Status) is displayed as "PLAY" (Figure 2-24).
The frame number for the image played back is
displayed on the frame counter (Frame).
■
J-PAD3 Display
The status screen is shown in Figure 2-23, and
the camera mode "PLAY" is displayed. The
recording conditions for photographing are shown
on the status screen during the PLAY mode.
The frame number for the image played back is
shown in the frame counter (FRAME).
The recording time for the image played back is
shown in the frame time (TIME).
There will be a mark showing the current
playback frame position on the playback range bar.
This mark will move to the last frame position and
then the single frame playback will stop.
Frame 2-24 Image Display (PLAY Mode)
Frame 2-25 J-PAD3 Display (PLAY Mode)
Current playback
frame position
Last frame
position
1st frame
position