NAC Image Technology MC-529, User Manual

Page: 32 / 180

(00235) 2-4
2.3 Power
After connecting each device, turn the power on for the MEMRECAM GX-3 by plugging in the AC adapter
power switch. There is no power switch for the main MEMRECAM GX-3 unit. Once the MEMRECAM GX-3
starts up, it enters the STOP mode.
2.3.1 MEMRECAM GX-3 Startup
■
Viewfinder Image Display
1) Turn on the AC adapter power switch to power the
MEMRECAM GX-3.
2) Press the viewfinder power switch to display the initial
screen (Figure 2-3).
3) After a few moments, it will switch to the system information
screen (Figure 2-4).
The yellow gauge in the center shows the status of the
automatic camera diagnostics.
図
2-3
初期画面