NAC Image Technology MC-529, User Manual

Page: 135 / 180

(00235)
5-17
5.2.15 System Information Display (INFO)
Displays the system information. These settings cannot be changed.

Model name (MODEL)

Firmware version (VERSION)

Camera ID number (CID)

Memory capacity (MEM SIZE)

Hardware revision (REVISION)

Network connections (NETWORK)

IP address, sub net mask (IP ADDR)

MAC address (MAC ADDR)

Total operation time (ELAPSED)
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SYS MENU" from the TOP
MENU and press SET to display the SYS MENU.
3) Use the arrows to select "INFO" from the SYS MENU
and press SET to display the INFO sub menu (Figure
5-24).
4) Use the arrows and the arrows to verify all of
the system information.
5.2.16 Network Settings (IP ADDR)
The IP address and sub net mask can be set.
1) While in the STOP mode, simultaneously press STOP ,
SET and TRIG to display the SYSTEM SETUP
MENU.
2) Use the arrows to select "IP ADDR" from the
SYSTEM SETUP MENU and press SET (Figure 5-25).
The IP address and sub net mask will be displayed.
3) Use the arrows to move columns and use the arrows
to change the numerical value.
4) Press SET again to set the IP address and sub net
mask.
5) Use the arrows to select "REBOOT" and press SET
(Figure 5-26).
Restart the system using "REBOOT" to show the IP address
and sub net mask.
Figure 5-24 INFO
Figure 5-25 IP ADDR
Figure 5-26 REBOOT