NAC Image Technology MC-529, User Manual

Page: 34 / 180

(00235) 2-6
■
Main Unit Rear Panel LED Display
1) After turning on the power to the MEMRECAM GX-3, the main unit rear panel LED will display that
shown in Figure 2-6
①
and
②
until the automatic diagnostics have been completed.
2) Once the MEMRECAM GX-3 starts up normally and enters the STOP mode, the main until rear panel
LED will display that shown in Figure 2-6
③
.
Figure 2-6 The Main Unit Rear Panel LED Display at Startup
2.3.2 Remote Control J-PAD3 Startup
1) After the MEMRECAM GX-1 power has been turned on, power is
supplied to the remote control J-PAD3. There is no power switch
on the J-PAD3 unit.
The version information screen is shown on the J-PAD3 LCD
display. (Figure2-7)
2) After a few moments, it will switch to the status screen for the STOP mode and the 11 statuses are
displayed. (Figure 2-8).
①
Camera mode
②
Frame counter
③
Frame time
④
Playback speed
⑤
Recording speed
⑥
Frame size
⑦
Shutter exposure time
⑧
Trigger timing
⑨
ID number
⑩
Scene number
⑪
Playback range bar
Figure 2-7 J-PAD3 version information screen
Figure 2-8 Status Screen (STOP mode)