NAC Image Technology MC-529, User Manual

Page: 126 / 180

(00233) 5-8
5.2.5 Display/hide the superimposed information by the camera mode
(OSD MODE)
You can set display/hide the superimposed information on the image (OSD: On Screen Display) by
camera mode.
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SYS MENU" from the TOP
MENU and press SET to display the SYS MENU.
3) Use the arrows to select "OSD MODE" from the SYS
MENU (Figure 5-7).
4) Use the arrows to select Display/do not display
superimposed information by the camera mode. (Figure 5-9).
8
ALWAYS Display information superimposed with all cameras mode
STOP Display information superimposed only at the time of STOP mode
5.2.6 Trigger clock settings (OSD TIME)
At Trigger of superposition information, I can set it as an image at a trigger time display or the present
time display (only VIEW, ARM, and REC mode).
5) While in the STOP mode, press MENU to display the
TOP MENU.
6) Use the arrows to select "SYS MENU" from the TOP
MENU and press SET to display the SYS MENU.
7) Use the arrows to select "OSD TIME" from the SYS
MENU (Figure 5-7).
8) Use the arrows to select trigger clock setting. (Figure
5-10).
TRIG Display trigger time
CRNT In VIEW, ARM, and REC mode, I display the present time.
(In STOP, PLAY, and LOOP mode, I display trigger time)
The time of CRNT selection -- VIEW, ARM, and REC mode -- the present time -- table
示
-- the title of
OSD is displayed as Date Time at last time (usually Trigger).
When the image trigger function is being used, I am displayed as Image Trigger.
TRIG CRNT Image trigger
Figure 5-11 Screen display
Figure 5-9 OSD MODE
Figure 5-10 OSD TIME