NAC Image Technology MC-529, User Manual

Page: 151 / 180

(00235) 7-11
7.4 System Controls
7.4.1 Status Display on the Main Unit LED
1) POWER LED(PW)
Lit green Power ON (Normal)
Lit red Power ON (Fail)
OFF Power OFF
Note ) Fail indicates the presence of any one of camera startup, failure detected, abnormal
power voltage detected or elevated sensor temperature detected
2) CAMERA MODE LED (CM)
Red REC mode (Camera image output, saving in the camera image memory
after trigger detection)
Blue STOP mode(Memory image output. Immediately after startup, either the
playback mode or the transmission mode)
White VIEW mode (Camera image output, memory contents retained after save
completed)
Magenta ARM mode (camera image output, memory contents discarded after save
completed and camera image being saved in memory)
OFF Power OFF, or starting up
Flashing Set in EST mode, and EST pulse input
Only with VIEW, ARM, REC modes
3) MEMORY BACKUP LED (MB):As stated in 7.4.4
4) ETHERNET LED (ET)
Lit green Network connection
Flashing green Network communicating
OFF Network not connected or power OFF
5) USB LED (UB)
Lit green Bus power ON
OFF Bus power OFF
7.4.2 Video Output On Screen Display
1) Mode display LLIGHT (LOW LIGHT), STOP, VIEW, ARM, REC, FAIL
2) Recording speed 50~198,000 (pps units in integers), EST
3) Shutter 1/100~1/333333, 1~9996( micro units in integers)
4) Trigger timing START, CENTER, END, -100~+100(% units in integers)
5) Frame count The current screen display frame number (integer) with the trigger frame
at 0, or the relative time for the current screen display with the trigger
frame as time 0 (fx compatible function, unit: microseconds, 24 hour
system). Switch according to the menu.
6) Time Exposure center time (unrelated to the trigger frame) for the current
screen display