NAC Image Technology MC-529, User Manual

Page: 30 / 180

(00235) 2-2
2.1 The Flow of Operations
The three methods to operate the MEMRECAM GX-3 are as follows.

Operation using the remote control J-PAD3
（
OPTION
）

Operation using the control software GXLink

Operation using external input/output signals
This user's manual describes operation using the remote control J-PAD3.
The flow of operations for basic recording, playback and storage is shown in Figure 2-1. Settings using
the J-PAD3 are described in Chapters 3, 4 and 5.
Refer to
【
GXLink User's Manual
】
for operations using the control software GXLink.
Live Image Display
(VIEW Mode)
Preparations
Power on
Save to USB
compatible storage
media
Power off
(Memory Backup)
(page 2-3 )
(page 2-4~6)
Recording Settings
(Setting of the recording speed, frame size,
shutter exposure time, etc)
(page 2-9~12)
(page 3-17~39)
Recording
(ARM/REC Mode)
Playback
(PLAY Mode)
Stop
(STOP Mode)
Playback Image Settings
(Adjustment of the playback image quality)
(page 2-7)
Stop
(STOP Mode)
Stop
(STOP Mode)
Live Image Settings
(Adjustment of the live image quality)
Save Settings
(Setting of the save frame range, save method,
etc)
(page 2-8)
(page 2-12)
(page 2-13~21) (page 2-22~23)
(page 3-5~16)
(page 3-47~59)
(page 3-47~59)
(page 5-5~18)
(page 4-3~5)
Recording Settings
(Setting of the recording method, memory
segment, synchronized signal, etc)
System Settings
(Setting of the date, superimposed Information
display, etc)
Figure 2-1 The Flow of Operations