NAC Image Technology MC-529, User Manual

Page: 155 / 180

(00235) 7-15
MULTIS(A) Multi trigger recording (All blocks)(A)
MULTIS(L) Multi trigger recording (All blocks)(L)
(A) of MULTI (A) is the abbreviation for ALL by the above.
The other (A) is the abbreviation for AUTO, it changes a segment
automatically, does all the segment records, and is completed.
(L) is the abbreviation for LOOP, I automatic-segment-switch the other (A),
and it overwrites a memory segment continuously. Only the STOP
command stops LOOP. (C) is an abbreviation of CONTINUATION.
Priority is given to NORMAL (A/L), EVENT (A/L), BURST (A/L), and
MULTIS (A/L) over an AUTO VIEW function.
/ BLOCKS Multi trigger block settings,
1
~16
･ SIG SET Input/output signal settings menu
/ TRIG1 TRIG1 trigger input polarity settings,
POSI(rising),
NEGA
(falling edge)
/ TRIG2 J3 trigger input polarity settings,
CRNTON
(current ON), CRNTOFF(current OFF)
/ EST2 J3 EST2 input polarity settings,
POSI (rising),
NEGA
(falling edge)
/ EPO J3 EPO output polarity settings,
POSI (exposing during H),
NEGA
(exposing during L)
/TRIGFLT Triger filter settings,
200.0
､ 0.0~6553.5 (in usec)
/EST FLT EST filter settings,
0.0
~6553.5 (in usec)
･ SYS SET System settings menu
/ SEG SIZE Memory segment settings,
1
~8 (2GB MODEL),
1
~16(4GB MODEL)
/ REBOOT Reboot with network settings
･
INFO Information display menu
/ MODEL Display model name
/ VERSION Display camera software version (firmware)
/ CID Display camera ID number
/ MEM SIZE Display memory capacity
/ REVISION Display camera hardware revision
/ NETWORK Display network
/ IP ADDR Display IP address, sub net mask
/ MAC ADDR Display MAC address
/ ELAPSED Display total elapsed time
4.3) Save Menu (SAVE MENU)
･ MCFF Save in MCFF format, Show saved file name after saved
･
FREE FRM Frames available for saving display
･
SAVE FRM Display and settings for range saved to USB external media
･ REC FRM Recording frame range display
･
YC TIFF Save still image with VGA resolution being displayed in YC TIFF format,
Show saved file name after saved
･
SAVE SET Save settings menu
/ RETRY Compare data and if there is a discrepancy, retry
OFF
, ON
/ ERASE Black data erase,
OFF
, ON
/ ERROR Operation settings when error detected,
ABORT
, CONTINUE