(00233)
5-16
5.2.14 Display/Do Not Display Warning Settings (WARNING)
It is possible to set display/do not display warning messages for live images.
Battery
Warning
(
BATTERY
)
Warning when the voltage of the input power source is low or abnormal.
RTC Battery Warning (RTC BATT)
Warning when the internal timer battery voltage is low.
Abnormal Recording Speed Warning (FRM RATE)
Warning when the recording speed cycle is not within the tolerance range.
Abnormal Interruption of Camera Display Warning (IRQ)
Warning when the recording display interruption signal goes out.
Black balance data mismatching warning(BLK BAL)
If a fixed pattern noise peculiar to a sensor rectifies and it searches for higher definition image
quality, please maintain black balance just before a radiography.
When maintaining black balance, it is necessary to make it the same frame size as the time of a
radiography, a recording speed, and a shutter setting.
You can display warning, when "frame size, a recording speed, or a shutter" is changed after
maintaining black balance.
If black balance is immediately restarted when warning is displayed, you can perform the right
black balance amendment.
However, it may be necessary to display warning at every radiography by the employment
which certainly maintains black balance.
You can set black balance data mismatching warning as OFF.
1) While in the STOP mode, press MENU
to display the
TOP MENU.
2) Use the arrows
to select "SYS MENU" from the TOP
MENU and press SET
to display the SYS MENU.
3) Use the arrows
to select "WARNING" from the SYS
MENU and press SET
to display the WARNING
sub-menu. (Figure 5-23)
4) Select the warnings to be set and use the arrows
to
select display/do not display for the warnings.
BATTERY
ON
Display battery remaining warning
OFF
Do not display battery remaining warning
RTC BATT
ON
Display RTC battery warning
OFF
Do not display RTC battery warning
FRM RATE
ON
Display abnormal recording speed warning
OFF
Do not display abnormal recording speed warning
IRQ
ON
Display abnormal camera display interruption warning
OFF
Do not display abnormal camera display interruption warning
BLK BAL
ON Display black balance data mismatching warning
OFF Do not display black balance data mismatching warning
Figure 5-23 WARNING
Summary of Contents for MC-529
