NAC Image Technology MC-529, User Manual

Page: 73 / 180

(00235) 3-21
3.2.14.4 Normal Recording
Normal recording is the recording method that saves images to the appropriate memory segment for a
single trigger input. The three modes within normal recording include NORMAL, NORMAL(A) and
NORMAL(L). Refer to
【
3.2.14.3 Setting Method
】
for the method of setting normal recording.
Next is the recording sequence for each mode.
3.2.14.4.1 NORMAL
Figure 3-31 shows how to switch modes with the J-PAD3 during normal recording (top of the figure) and
saving in the memory (bottom of the figure).
The sequence for segmenting the memory into four memory segments and performing normal recording
for memory segment 1 is shown below.
SEGMENT 2 SEGMENT 3 SEGMENT 4
STOP VIEW
ARM
SEGMENT 1
REC
switching of the Camera mode with the JPAD3 operation
automatic switching of the Camera mode
Figure 3-31 Normal Recording (NORMAL, number of segments
：
4)
1) Verify that the MEMRECAM GX-3 is in the STOP mode.
2) While in the STOP mode, press VIEW/ARM
on the J-PAD3 to switch to the VIEW mode.
3) While in the VIEW mode, press VIEW/ARM
on the J-PAD3 to switch to the ARM mode. While the
images are overwritten to the appropriate memory segment (SEGMENT1), it awaits trigger input.
4) While in the ARM mode, press TRIG
on the J-PAD3 or use the external trigger for input to switch to
the REC mode. Recording will end according to the set trigger timing.
5) Once recording to the appropriate memory segment (SEGMENT1) has been completed, it switches
from the REC mode to the STOP mode.
* Press
STOP even when recording to the appropriate memory segment has not been completed to
stop recording. Depending on the camera mode when STOP is pressed, the number of frames
saved before recording is stopped will vary.
・
If STOP is pressed during the ARM mode
If the custom setting for the trigger timing is +100%, recording stops when the same number of
frames is saved.
・
If STOP is pressed during the REC mode
Recording stops after saving from the frame where recording was started to the frame at the instant
STOP
was pressed.