NAC Image Technology MC-529, User Manual

Page: 136 / 180

(00233) 5-18
5.2.17 Reset Settings (RESET)
Reverts all of the settings to the factory settings.
1) While in the STOP mode, simultaneously press STOP ,
SET and TRIG to display the SYSTEM SETUP
MENU.
2) Use the arrows to select "RESET" from the SYSTEM
SETUP MENU and press SET (Figure 5-27).
All of the settings will revert to the factory settings.
3) Use the arrows to select "REBOOT" and press SET
(Figure 5-28).
Restart the system using "REBOOT" to show the new
settings.
5.2.18 Video Output Method Selection (VIDEOOUT)
Either NTSC or PAL can be selected as the video output method.
1) While in the STOP mode, simultaneously press STOP
,
SET and TRIG to display the SYSTEM SETUP
MENU.
2) Use the arrows to select "VIDEOOUT" from the
SYSTEM SETUP MENU (Figure 5-29).
3) Use the arrows to select the video output method.
NTSC The video output method is NTSC
PAL The video output method is PAL
4) Use the arrows to select "REBOOT" and press SET
(Figure 5-30).
Restart the system using "REBOOT" to show the video
method.
Figure 5-27 RESET
Figure 5 -30 REBOOT
Figure 5-29 VIDEOOUT
Figure 5-28 REBOOT