NAC Image Technology MC-529, User Manual

Page: 109 / 180

(00235) 3-57
3.3.11 Scroll Image (SCROLL)
Moves the enlarged image for display.
When an enlarged image is displayed in the display area, the center coordinates of the image are moved
and the image not displayed can be shown. With the center coordinates at (0, 0), the photographed image
can be moved in single pixel units.
For example, if the zoom setting is "x4" and it is moved +1 in the direction of the X axis, the image shifts 4
pixels to the left on the video monitor. Also, if it is moved +1 in the direction of the Y axis, the image shifts
down 4 pixels on the video monitor.
3.3.11.1 Scrolling Live Images
1) While in the VIEW mode, press MENU to display the
VIEW MENU.
2) Use the arrows to select "SCROLL" from the VIEW
MENU and press SET . (Figure 3-72)
3) Use the arrows to shift the display position in the
direction of the X axis.
4) Use the arrows to shift the display position in the
direction of the Y axis.
5) Use TRIG to return to the center coordinates (0 0).
6) Press SET again to set the display position.
3.3.11.2 Scrolling Playback Images
1) While in the STOP mode, press MENU to display the
TOP MENU.
2) Use the arrows to select "SYS MENU" from the TOP
MENU.
3) Use the arrows to select "SCROLL" from the SYS
MENU and press SET . (Figure 3-73)
4) Use the arrows to shift the display position in the
direction of the X axis.
5) Use the arrows to shift the display position in the
direction of the Y axis.
6) Use TRIG to return to the center coordinates (0 0).
7) Press SET again to set the display position.
Figure 3-72 SCROOL(VIEW MENU)
Figure 3-73 SCROOL(SYS MENU)