NAC Image Technology MC-529, User Manual

Page: 159 / 180

(00235) 7-19
7.5.6 J3 Connector
1) Connector
ID color Blue
Name REMOTE
Connector name
LEMO EGG.2B.318
Plug name LEMO FGG.2B.318
2) Internet
Standard 1000BASE-T(IEEE 802.3 ab), 100BASE-TX(IEEE 802.3 u),
10BASE-T(IEEE 802.3)
insulation
3) EST2 / EVENT Input
Signal level TTL level, 5V pull up resistance 4700 Ω , insulation
L level:- 0.5VDC (minimum applied voltage) ~0.8VDC
H level:2VDC~5.5VDC (maximum applied voltage)
Function With EST input, exposure starts H → L photographs one image
Reverse polarity function. Synchronization delay 1.5 μ sec or less
During EVENT input, the signal level is saved along with the image.
Refer to APPENDIX B for details.
4) IRIG-B Input
Signal level 3 V(p-p)(1~10 V(p-p)), high impedance, insulation
Standard IRIG Standard 200-98
Refer to APPENDIX E for details.
5) TRIG2 Trigger Input
Signal level Current loop with photo coupler, insulation
Current limiter resistance 1500 Ω , maximum applied voltage ±32V
Function Trigger valid at 5V or more. Reverse polarity function.
Refer to APPENDIX A for details.
6) EPO Output
Signal level TTL level, insulation. Reverse polarity function.
Refer to APPENDIX C for details.
7) Power Control
Signal level TTL level, 5V pull up resistance 4700 Ω , insulation
L level:- 0.5VDC (minimum applied voltage) ~0.8VDC
H level:2VDC~5.5VDC (maximum applied voltage)
Function Power ON with H, power OFF with L. No reverse polarity function.
Refer to APPENDIX D for details.