Falcon II Outdoor series printers – Maintenance Manual
80
AP-74065, Rev. 1.0, 21/11/03
4.5.3. Replacing the PF deceleration pulley assembly
Notes :
¾
Remove following covers before replacing the parts in the PF motor assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
Media guide F: refer to "Removing media guide F"
Step 1 :
Follow step 1 to 6 in "Replacing the PF_ENC assembly and PF scale assembly" to remove the PF scale
installation board.
Step 2 :
Loosen the set screw fixing the coupling.
1 = Coupling
2 = Set screw fixing the coupling
3 = Y deceleration pulley axis
Step 3 :
Pull the Y deceleration pulley to the opposite side of the origin and then remove the deceleration pulley
assembly.
Step 4 :
Reinstall all parts in the opposite order of the removal procedure.
Step 5 :
Adjust the tension of the PF deceleration belt according to "PF deceleration belt tension adjustment".
