Falcon II Outdoor series printers – Maintenance Manual
305
AP-74065, Rev. 1.0, 21/11/03
(1) Make sure that
the connections of
the head cable
connectors at the
CR board assembly
side and the print
head side is good.
• Check the head
cables for open
conditions.
• Make sure that
they are securely
connected.
• Redo the
connections of the
head cables to the
connectors.
→
Replacing the CR
board assembly.
(2) Check the head
cables for the open
conditions.
• Replace the head
cables.
→
Replacing the
print head assembly
and head tape
power cable.
(3) The print head
may be damaged.
• Replace the print
head assembly.
→
Replacing the
print head assembly
and head tape
power cable.
(4) Check the CR
cables for open
conditions.
• Replace the CR
tape power cables.
→
Replacing the
steel bearer, tube
guide, CR tape
power cable and ink
tube.
(5) The HEAD_DRV
board assembly
may have a
problem.
• Replace the
HEAD_DRV board
assembly.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
5
Ink is not supplied when ink
replenishment is complete.
(6) The Mainboard
assembly may have
a problem
• Replace the
Mainboard .
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
6
Operation does not take place at
all after the power is supplied.
7
When power is supplied,
“Initialize” is displayed, then
reset.
8
Initialization does not take place
even if the paper is set.
(1) Check if “Cover
Open” is displayed
on the LCD when
the front cover is
closed.
Check the proper
operation of the
cover sensory
assembly via
•Adjust the cover
sensor.
• Redo the
connections of
connectors J155
and J156 on the
Mainboard
assembly.
• Replace he cover
→
Cover sensor
adjustment
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
