Falcon II Outdoor series printers – Maintenance Manual
330
AP-74065, Rev. 1.0, 21/11/03
9.3.6. Problems relating to online and functions
No. Phenomenon
Check point
Action
Refer to
(1) Check the
centronics settings
in the operation
panel.
• Change the
setting.
→
User’s Guide
(2) Replace the
interface cables and
see if errors still
occur.
• Trouble such as
an open interface
cable or cables that
are too long may
cause
communication
failure. An
instruction must be
given so that only
cables compliant
with the standard
are used.
-
(3) The program
ROM may have
failed.
• Upgrade the
firmware version.
→
Firmware
installation
1
Online has not been properly
established by Centronics.
(4) The Mainboard
assembly may have
a problem.
• Replace the
Mainboard
assembly.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
(1) Check if the
cables in use for
connections are
correct.
• Use 100BASE-T
cross cables for
direct connections
to the host.
• Use 100BASE-T
straight cables for
connections using
HUBs.
-
2
Online has not been properly
established by the network.
(2) Check the
network settings in
the operation panel
for problems.
• Reset the settings
upon confirmation
by an network
administrator.
→
User’s Guide
3
Scaling is not functioning
correctly.
(1) The program
ROM may have
failed.
• Upgrade the
firmware version
→
Firmware
installation
4
Mirroring is not functioning
correctly.
(2) The Mainboard
assembly may have
• Replace the
Mainboard
→
Replacing the
