Falcon II Outdoor series printers – Maintenance Manual
54
AP-74065, Rev. 1.0, 21/11/03
4.2.11. Removing the maintenance cover
Step 1 :
Remove the I/H cover.
Step 2 :
Remove side cover R.
Step 3 :
Remove side cover L.
Step 4 :
Remove the front cover.
Step 5 :
Remove the carriage cover.
Caution :
Please note that this cover is only on a Falcon II Outdoor (2 heaters) printer.
Step 6 :
Remove the 6 screws fixing the maintenance cover.
Falcon II Outdoor 2 heater
Falcon II Outdoor 4 heater
1 = Screws (M3x8)
1 = Screws (M3x8)
Step 7 :
Remove the maintenance cover.
Step 8 :
Replace the parts inside the printer.
Step 9 :
Reinstall all parts in the opposite order of the removal procedure.
