MUTOH Falcon II Outdoor, Maintenance Manual

Page: 221 / 349

Falcon II Outdoor series printers – Maintenance Manual
221 AP-74065, Rev. 1.0, 21/11/03
6.3.2. Counter Initialization Menu
This menu initializes the life counters. The parameters that can be initialized in this menu are as follows.
Diagnosis item Description
Number of prints
initialization Initializes the total number of printing counter.
Ink initialization Initializes the ink capacity counter.
Waste ink initialization Initializes the waste fluid tank service life counter.
Head error reset Resets critical trouble errors due to over-current flowing the head.
Ink ID mask initialization Resets the ink ID mask.
Total initialization
Initializes the service life counter.
NVRAM initialization Initializes NVRAM.
Timer initialization Initializes the timer.
Cutter initialization Initializes the cutter cumulative counter.
CR motor initialization Initializes the CR motor service life counter.
PF motor initialization Initializes the PF motor service life counter.
Cleaning initialization Initializes the cleaning wiper service life counter.
Head unit 1 initialization Initializes the head 1 nozzle service life counter.
Head unit 2 initialization Initializes the head 2 nozzle service life counter.
Head unit 3 initialization Initializes the head 3 nozzle service life counter.
Head unit 4 initialization Initializes the head 4 nozzle service life counter.
* Initialize *
PrintNumber Ink ID
WasteInk Head error
(1/4)
* Initialize *
Ink All
NVRAM Timer
(2/4)
* Initialize *
TotalCut CR motor
PF motor Cleaning
(3/4)
* Initialize *
Head Unit 1 Head Unit 2
Head Unit 3 Head Unit 4
(4/4)