Falcon II Outdoor series printers – Maintenance Manual
184
AP-74065, Rev. 1.0, 21/11/03
5.5.12. Software Counter Initialization Menu
This menu initializes the software counters such as the ink amount counter.
Notes :
¾
Before delivery, always initialize the software counters.
The software counters that can be initialized through this menu are as follows.
Counter
Initial value
Ink amount counter
0
Ink consumption counter 1
0
Ink consumption counter 2
0
Ink consumption counter 3
0
Ink consumption counter 4
0
Ink consumption counter 5
0
Ink consumption counter 6
0
Ink consumption counter 7
0
Ink consumption counter 8
0
Cumulative printout timer
0
Waste
ink
counter 0
Ink ID mask
Reset
Initial ink charge flag
Set
Pressing the [ENTER] key in the operation panel performs the software counter initialization. Pressing the [CANCEL] key
cancels the initialization.
*
CountClear
*
Counter reset ?
↓
ENTER
*
CountClear
*
Wait little time
↓
End initialization
*
CountClear
*
R. Sns. Pos.
Testprint
CleanHead
CountClear
(3/4)
