Falcon II Outdoor series printers – Maintenance Manual
25
AP-74065, Rev. 1.0, 21/11/03
Post-Fixer (Heater C)
20 – 70°C
→
The post-fixer finalizes the fixation process and
helps to make the prints touch-dry.
Dryer (Heater D)
20 – 50°C
→
The dryer completes the drying for compatibility
with the take-up in combination with higher output
speeds.
→
Stickiness of printed banner materials is improved.
2.5.3. 2 or 4 heater
To verify if your printer is equipped with 2 or 4 heaters, please refer to the photo’s mentioned below.
Falcon II Outdoor 2 heater printer
Falcon II Outdoor 4 heater printer
