Falcon II Outdoor series printers – Maintenance Manual
260
AP-74065, Rev. 1.0, 21/11/03
Step 7 :
Connect up the tubing in the manner shown in the figure below.
1 = Tube connecting to the waste fluid tube
2 = Tube connecting cap 3
3 = Tube connecting to cap 1
Step 8 :
Use a linking tube to connect the new-part pump tube (DF-43951) to the tube connecting cap 2.
1 = Tube connecting to waste fluid side
2 = Tube connecting to cap 2
3 = Tube connecting to cap 4
4 = Newly-added pump tube (DF-43951, length = 40 mm)
5 = 2 tube for linking
Step 9 :
Insert into the waste fluid tubes from the pumps a piece of tube (DF-43951; 15 cm).
1 = piece of tube (15 cm)
