Falcon II Outdoor series printers – Maintenance Manual
279
AP-74065, Rev. 1.0, 21/11/03
9.2.2. Message type errors
The following explains the messages, items to be confirmed and remedies to take when message type errors occur while
the product is operating.
Message type errors are displayed when trouble occurs during operation.
When message type errors occur, this product displays the following error messages on the operation panel and stops the
operation.
When the causes of errors are removed, message type errors are restored and the printing operation will be restarted.
No. Message
Phenomenon
Check point
Action
Refer to
(1) Check the
operation of the
P_EDGE sensor
via “Test:Sensor”
of the self-
diagnostic
function.
• If the sensor
responds to the
presence of the
paper, adjust the
sensor volume.
• If the sensor
does not respond
to the presence of
the paper, replace
the P_EDGE
sensor assembly
→
Media sensor
sensitivity
adjustment
→
Replacing the
P_EDGE sensor
assembly.
(2) Make sure the
P_EDGE sensor
assembly
connector at the
cursor is securely
connected.
• Securely connect
it to CR board
assembly
connector J234.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
(3) Make sure the
R_REAR sensor
assembly cables
nderneath paper
guide R are
securely
connected.
• Securely connect
the cables to
Mainboard
assembly
connectors J128
and J129.
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
(4) Check the CR
tape power cables
for skewed
insertion.
• Redo the
connections of the
following
connectors :
• CR board : J201
– J216
• Mainboard : J137
– J152
→
Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
1 Undefined
paper
The printer failed to
detect the media.
(5) The CR tape
power cables may
be damaged.
• Replace the CR
tape power cables.
→
Replacing the
steel bearer, tube
guide, CR tape
power cable and
ink tube.
