Falcon II Outdoor series printers – Maintenance Manual
101
AP-74065, Rev. 1.0, 21/11/03
Step 4 :
Remove the 2 screws fixing the tube clamp.
1 = CR tape power cable
2 = Steel bearer
3 = Cable push plate
4 = Screws fixing cable push plate (M3x8)
5 = Screws fixing tube clamp (M3x8)
Step 5 :
Completely remove tube bundles 1 and 2.
1 = Tube bundle
2 = Tube bundle 2
Step 6 :
Remove the 4 screws fixing the tube clamp.
Step 7 :
Remove the tube clamp.
Step 8 :
Remove the coupling screws, O-ring and ink tube from the coupling.
Step 9 :
Replace the ink tube.
Step 10 :
Remove the 2 screws fixing the cable clamp.
Step 11 :
Replace the steel bearing.
Step 12 :
Replace the tube guide.
Step 13 :
Remove the pipe clamp.
