Falcon II Outdoor series printers – Maintenance Manual
111
AP-74065, Rev. 1.0, 21/11/03
Step 6 :
Remove the damper assembly from the print head assembly.
1 = Head tape power cable
2 = Damper assembly
3 = Print head assembly
4 = H ink tube, O-ring
Step 7 :
Remove the H ink tube, coupling screw and O-ring from the damper assembly.
Step 8 :
Replace the damper assembly.
Step 9 :
Replace the H ink tube and O-ring.
Notes :
¾
Please soak the O-ring in cleaning liquid before installation.
Step 10 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾
When tightening coupling screws, finger-tighten those. If using tools, it may result
in cracking where the screws fix damper and fail to fill the ink.
¾
Do not grasp the film area of the damper strongly. Doing so may cause faulty
damper and fail to print.
