Falcon II Outdoor series printers – Maintenance Manual
103
AP-74065, Rev. 1.0, 21/11/03
4.6.8. Replace the cover R sensor assembly and the cover L sensor assembly
Notes :
¾
Remove following covers before replacing the cover R sensor assembly and the
cover L sensor assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
(1) Replacing the cover R sensor assembly
Step 1 :
Remove the cover R sensor assembly connector from the Mainboard assembly.
Step 2 :
Remove the 2 screws fixing the cover R sensor assembly.
1 = Cover R sensor assembly
2 = Screws (M2x8) fixing the cover R sensor
assembly
Step 3 :
Replace the cover R sensor assembly.
Step 4 :
Reinstall all parts in the opposite order of the removal procedure.
Step 5 :
Perform cover sensor adjustment according to "Cover sensor adjustment".
(2) Replacing the cover L sensor assembly
Step 1 :
Remove media guide F.
Step 2 :
Remove the cover L sensor assembly connector from the cover L cable.
