Falcon II Outdoor series printers – Maintenance Manual
137
AP-74065, Rev. 1.0, 21/11/03
Step 9 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾
When installing the ink NOT sensor, do not tighten the screw tightly. Otherwise, the
switch may not come out.
Step 10 :
Make sure that the Ink NOT sensor switch moves.
4.11. REPLACING SUPPORTS AND SCROLLER
4.11.1. Replacing the waste fluid bottle assembly (Falcon II Outdoor 2H)
Notes :
¾
When replacing the waste fluid bottle assembly, be sure to perform following
operation to clear the counter. "High ink initialization" or " Cleaning initialization":
refer to "Counter Initialization Menu"
Step 1 :
Remove the waste fluid tube from the waste fluid bottle assembly.
1 = Waste fluid tube
2 = Waste fluid bottle assembly
Step 2 :
Replace the waste fluid bottle assembly.
Caution :
Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube
onto the printer or items close to the printer.
Step 3 :
Reinstall all parts in the opposite order of the removal procedure.
