Falcon II Outdoor series printers – Maintenance Manual
262
AP-74065, Rev. 1.0, 21/11/03
(2) For 87 inch spec
Notes :
¾
When the pump assembly has been installed to the main body, the pumps are
"pump 1", "pump 2", "pump 3" and "pump 4" in sequence from left to right, viewed
from the front.
¾
When the pump assembly has been installed to the main body, the bundling
locations are "bundling location A", "bundling location B" and "bundling location C" in
sequence from left to right, viewed from the front.
1 = Pumps
Step 1 :
Waste fluid tube E and an ink tube joining tube are added between fluid tube A and the pump 4 tube fitting that
groups together the waste fluid side tubes.
