Falcon II Outdoor series printers – Maintenance Manual
132
AP-74065, Rev. 1.0, 21/11/03
4.9.3. Replacing the pump motor assembly
Caution :
The motor is hot after the product has been operated, so be careful not to burn yourself.
Step 1 :
Follow the instructions in "Replacing the pump assembly " to remove the pump assembly.
Step 2 :
Remove the 2 screws fixing the pump motor assembly.
1 = Pump motor assembly
2 = Screws (M3x6) fixing the pump motor assembly
Step 3 :
Replace the pump motor assembly.
Step 4 :
Reinstall all parts in the opposite order of the removal procedure.
