Falcon II Outdoor series printers – Maintenance Manual
329
AP-74065, Rev. 1.0, 21/11/03
(2) Has the cutter
cap been securely
installed?
• Reset the cutter
cap securely.
→
User’s Guide
(3) Check if the
cutter moves up and
down smoothly.
• Reinstall the cutter
spring.
-
(4) Check the cutter
grooves for
accumulated paper
dust and slips.
• Remove the
accumulated paper
dust along the
direction of the
grooves.
→
User’s Guide
(5) Check if the
cutter blade is
parallel with the
groove.
• Make adjustments.
→
Replacing the
cutter holder, cutter
spring, cutter cap,
solenoid assembly
and solenoid spring.
(6) The cutter may
have a problem.
• Replace the cutter.
→
User’s Guide
(1) Check the
operation panel and
make sure the
InkDryTime has not
been set.
• Change the
settings.
→
User’s Guide
7
Cutting starts after the
completion of the print.
(2) Check the LCD
and see if
messages for an
analysis have been
displayed.
• Printing data
remains.
→
User’s Guide
