Motorola BSR 64000, Reference Manual

Page: 727 / 836

BGP Commands
16-45
neighbor timers
The neighbor timers command sets the timers for a particular BGP peer or peer
group. The no neighbor command clears the timers for a particular BGP peer or peer
group.
Use the neighbor timers command to configure a specific neighbor or peer-group
timers values to bypass the timers configured for all BGP neighbors using the timers
bgp command.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
neighbor {<A.B.C.D> | <WORD>} timers {<0-21845>} [<0-65535>]
no neighbor {<A.B.C.D> | <WORD>} timers
Command Syntax
Command Default
keepalive, 60 seconds
hold time, 180 seconds
Note: If, during the negotiated holdtime (which is the smallest of configured
hold time and the holdtime advertised by the neighbor), no messages arrive,
the peer will be brought down. If the negotiated holdtime is 0, then the peer
will never be brought down, because it hasn’t received any messages. If the
value of the keepalive timer is 0, then no keepalive messages will be sent.
A.B.C.D neighbor IP address
WORD name of BGP peer group
0-21845 frequency of keepalive messages to peers in seconds
0-65535 amount of time passed when no keepalive message is
sent, in seconds