manualshive.com logo in svg

Motorola BSR 64000, Reference Manual

Share
Download
Motorola BSR 64000 Reference Manual Download Page 31

System Administration Commands

1-1

Introduction

This chapter describes the following types of commands for the BSR 64000™:

User management commands which establish authentication and to protect the 
network from unauthorized users.

Configuration file commands that handle the operating system and the system 
software for the BSR. The configuration file commands allow you to customize the 
operating system configuration at system startup, and to modify and store the 
configuration file for later use.

System services commands that globally configure IP system services used with the 
BSR, such as protocols, NVRAM, IP parameters, the operating system, and the 
system clock

Lightweight Directory Access Protocol (LDAP) commands that are used with the 
BSR to access online directory services over the TCP/IP network protocol. The BSR 
becomes an LDAP client and connects to an LDAP server to requests services and/or 
information. 

Logger commands which provide a way to configure system event reporting 
intended for diagnostics. The information in the report contains actions such as 
system startup, status, and event classes. 

Summary of Contents for BSR 64000





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands