Motorola BSR 64000, Reference Manual

Page: 740 / 836

BSR 64000 Command Reference Guide
16-58
set metric-type
The set metric-type command sets the destination routing protocol. The no set
metric-type command returns the default.
Use the set metric-type command, and the match and set commands to configure the
rules for redistributing routes from one routing protocol to another. Each set
metric-type command has a list of match and set commands associated with it. The
match commands specify the match criteria, which are the conditions under which
redistribution is allowed for the current set metric-type command. The set
commands specify the set actions, the particular redistribution actions to perform if
the criteria enforced by the match commands are met. The no set metric-type
command deletes the route map.
Group Access
ISP
Command Mode
Route-map configuration
Command Line Usage
set metric-type {internal | external | type-1 | type-2}
Command Default
Command Default
disabled
internal internal metric
external external metric
type-1 OSPF external type 1 metric
type-2 OSPF external type 2 metric