Motorola BSR 64000, Reference Manual

Page: 717 / 836

BGP Commands
16-35
neighbor password
The neighbor password command enables the Message Digest 5 (MD5)
authentication on a TCP connection between two BGP peers. The no neighbor
password command disables the Message Digest 5 (MD5) authentication on a TCP
connection between two BGP peers.
Use the neighbor password command to authenticate and to verify TCP connections
between two BGP peers, of which the same password is configured. This command
begins the MD5 generation for outgoing packets and check every segment on a TCP
connection for incoming packets.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
neighbor {<A.B.C.D> | <WORD>} password {0 | 7 }<LINE>
no neighbor {<A.B.C.D> | <WORD>} password {0 | 7} <LINE>
Command Syntax
Command Default
disabled
A.B.C.D neighbor IP address
WORD name of neighbor peer-group
0 specifies an UNENCRYPTED password will
follow
7 specifies an ENCRYPTED password will
follow
LINE the password (1-32 characters)