Motorola BSR 64000, Reference Manual

Page: 575 / 836

CMTS Commands
13-105
show cable modem
The show cable modem command is used to gather a variety of cable modem (CM)
statistical information used to evaluate network performance, troubleshoot
registration problems, and learn specific registration and ranging information on
modems connected to a specific interface.
Use the show cable modem command to see detailed modem configuration
information for a specific head-end modem. The following information is provided:
Cable modem connectivity states are as follows:
Interface CM interface with active connection
Upstream IF Index Upstream interface to which the cable
modem belongs.
Prim SID Primary Service Identifier number.
Connectivity State Describes the connectivity state of a cable
modem. The table below describes the 20
cable modem connectivity states supported
on the BSR.
Timing offset CM current timing adjustment.
Rec Power CM receive downstream power level in
dbmv.
IP address CM IP address
MAC address Media Access Control layer address
init(o) Option file transfer was started.
init(t) Time-of-day (TOD) exchange was started.
init(r1) CM sent initial ranging parameters.
init(r2) CM is ranging.
init(rc) Ranging is complete.
dhcp(d) DHCP Discover was sent by CM.
dhcp(o) DHCP Offer was received.
dhcp(req) DHCP Request was sent by CM.
dhcp(ack) DHCP Ack was received, IP address was
assigned by DHCP server.