Motorola BSR 64000, Reference Manual

Page: 358 / 836

BSR 64000 Command Reference Guide
8-8
area stub
Use the area stub command to configure an OSPF area as a stub area. A stub area
allows a default route, intra-area routes, and inter-area routes, but disallows
autonomous system (AS) external routes, virtual links, and Autonomous System
Boundary Router (ASBR) routes.
The optional area stub no-summary command argument is used to prevent an area
border router (ABR) from sending further Type 3 link-state advertisements (LSAs)
into the stub area.
Use the no area stub command to return the area that you defined as a stub area to a
non-stub OSPF area.
Group Access
ISP
Command Mode
Router configuration
Command Line Usage
area {<area-id> | <ip-address>} stub [no-summary]
no area {<area-id> | <ip-address>} stub
no area {<area-id> | <ip-address>}
Command Syntax
Note: If there is more than one router within a stub area, ensure that the area
that you are creating as a stub area is defined as a stub area on each of
these routers.
area-id OSPF area ID number.