Motorola BSR 64000, Reference Manual

Page: 132 / 836

BSR 64000 Command Reference Guide
2-14
interface
The interface command specifies an interface for further configuration. Once the
interface is selected you enter Interface configuration mode.\
interface {cable <slot>/<interface> | ethernet <slot>/<interface> | gigaether
<slot>/<interface> | loopback <0-16> | pos <slot>/<interface> | tunnel <0-255>}
Command Syntax
cable CMTS that provides 1 downstream channel
and 4 upstream channels. Commonly referred
to as the cable interface.
ethernet On the SRM module, Ethernet interface 0 is a
10 Mbps management interface that does not
support the negotiation feature and is
associated with its corresponding port on the
SRM I/O module.
Ethernet interface 1 and 2 are typically used
to support an external T1/E1 BITS clock and
are associated with their corresponding ports
on the SRM I/O module.
On the 8-port Ethernet module, there are 8 10/
100 Mbps Ethernet ports.
gigaether Provides one 1000 Mbps optical Ethernet
interface.
loopback Loopback interfaces are used to act as
inbound logical interfaces when physical
interfaces go down. Up to 16 loopback
interfaces can be configured on the BSR.
pos Provides two high speed OC3/OC12 SONET
interfaces.