Motorola BSR 64000, Reference Manual

Page: 336 / 836

BSR 64000 Command Reference Guide
7-14
offset-list
The offset-list command adds an offset to incoming and outgoing metrics to routes
learned via RIP. The offset value is added to the routing metric. An offset-list with an
interface slot/port is considered extended and takes precedence over an offset-list that
is not extended. The no offset-list command removes the offset for incoming and
outgoing metrics to routes learned via RIP.
Group Access
ISP
Command Mode
Router Configuration
Command Line Usage
offset-list {1-99} [any] {in | out} <0-16> [cable | ethernet | gigaether | pos] [<x/y>]
no offset-list {1-99} [any] {in | out} <0-16> [cable | ethernet | gigaether | pos]
[<x/y>]
Command Syntax
1-99 standard access-list-number, if 0, no action is
taken
any apply offset to all networks
in apply the offset to incoming metrics
out apply the offset list to outgoing metrics
0-16 positive offset to be applied to metrics for
networks matching the access list, if set to 0,
no action is taken
cable Cable interface
ethernet Ethernet interface
gigaether Gigabit Ethernet interface