Motorola BSR 64000, Reference Manual

Page: 421 / 836

VRRP Commands
10-11
ip vrrp priority
The ip vrrp priority command specifies the priority of the router to act as Master for
a given virtual router. The no form of this command restores the default priority value
of the router.
Use the ip vrrp priority command to select a Master when multiple routers are
associated with the same virtual router. If two routers have the same priority, their
primary IP address is compared, and the router with the higher IP address value takes
precedence. A priority of 255 is reserved for VRRP routers that own the virtual IP
address. Therefore, during configuration, if the router owns that IP address, priority is
automatically set to 255 and cannot be changed. Value 0 is also reserved for Master to
indicate the relinquishing of responsibility of the virtual router, and cannot be
configured either.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip vrrp <1-255> priority <1-254>
no ip vrrp <1-255> priority
Command Syntax
Command Default
100
1-255 the identification number of a configured
virtual router
priority 1-254 priority value to set for the virtual router