Motorola BSR 64000, Reference Manual

Page: 661 / 836

POS Commands
15-11
Command Syntax
Command Default
for c2, 0xCF
for j0, -xCC
for s1 0x0
c2 hexnum path signal identifier used to identify the payload content type,
value is 0xCF for PPP or HDLC without scrambling;
0x16 for PPP or HDLC with scrambling
c2-exp hexnum
j0 hexnum the section trace byte, value is 0x1 for interoperability with
some SDH devices in Japan
j0 16 byte string the section trace byte sequence, a character string of 15
characters may be entered for interface labeling. (The first byte
contains a calculated CRC-7 byte.
j1 hexnum the path trace byte, default value of 0x0.
j1 16 byte string the path trace byte sequence, a character string of 15 characters
may be entered for STS Channel labeling. The last two bytes
are set to CR and LF for framing purposes
j1 64 byte string the path trace byte sequence, a character string of 62 characters
may be entered for STS Channel labeling. The last two bytes
are set to CR and LF for framing purposes.
s1 hexnum for synchronous status messaging.