Motorola BSR 64000, Reference Manual

Page: 155 / 836

IP Commands
2-37
ip route
The ip route command is used to configure a static route when the router cannot
dynamically build a route to the specific destination or if the route must be in place
permanently. The no ip route command remove a static route.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
ip route <prefix> <mask> {<prefix> | null <num:0,0>} [<distance>] [tag
<num:1-4294967295>]
no ip route <prefix> <mask> {<prefix> | null <num:0,0>} [<distance>] [tag
<num:1-4294967295>]
Command Syntax
prefix static route destination prefix
mask static route destination prefix mask
null null interface and port, valid values 0 and 0
distance administrative distance, default value 1
tag match value to control route-map
redistribution, valid values 1 to 4294967295