manualshive.com logo in svg

Motorola BSR 64000, Reference Manual

Share
Download
Motorola BSR 64000 Reference Manual Download Page 525

CMTS Commands

13-55

cable shared-secret

The cable shared-secret command activates or deactivates cable modem 
authentication with a shared-secret key. The no cable shared-secret command sets 
the cable shared-secret back to the default.

Use the cable shared-secret command to authenticate the cable modem such that all 
cable modems must return a text string to register for access to the network.

If no cable shared-secret is configured on CMTS, secret key checking is not available 
on any cable modem. If shared-secret is configured on CMTS, cable modems have to 
use the secret key obtained from the CM configuration files obtained from the TFTP 
server.

Group Access

MSO

Command Mode

Global Configuration

Command Line Usage

cable shared-secret [0 <string> | 7 <hexnum>] 
no cable shared-secret [0 <string> | 7 <hexnum>] \

Command Syntax

Command Default

null string

0

Unencrypted, need to specify a string.

7

Encrypted, need to specify a key.

string

The authentication string (enclosed with 
double quotes).

hexnum

The authentication key in hex number.

Summary of Contents for BSR 64000





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands