Motorola BSR 64000, Reference Manual

Page: 287 / 836

Access List Commands
5-3
access-list (standard)
The access-list (standard) command defines a standard access list to configure and
control the flow of routing information and traffic by matching a packet with a permit
or deny result. The no access-list command deletes the access-list.
Use the access-list command to restrict routing update information; control the
transmission of packets on an interface, or control virtual terminal line access.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
access-list <1-99> <1300-1999> {deny | permit} {<A.B.C.D> [<A.B.C.D>] | any |
host <A.B.C.D>}
no access-list <1-99> <1300-1999>
Command Syntax
1-99 standard access list
1300-1999 standard IP access list (expanded range)
deny
deny access if conditions are matched
permit
permit access if conditions are matched
A.B.C.D address to match
A.B.C.D wildcard bits
any any source host
host A.B.C.D a single source host