Motorola BSR 64000, Reference Manual

Page: 732 / 836

BSR 64000 Command Reference Guide
16-50
route-map
The route-map command creates or modifies route-maps and their sequences. The no
route-map command removes the corresponding sequence from the route-map.If
there are no sequences left in the route-map, the route-map will be deleted too.
Use the route-map command, and the match and set commands to configure the
rules for redistributing routes from one routing protocol to another. Each route-map
command has a list of match and set commands associated with it. The match
commands specify the match criteria, which are the conditions under which
redistribution is allowed for the current route-map command. The set commands
specify the set actions, the particular redistribution actions to perform if the criteria
enforced by the match commands are met. The no route-map command
deletes the route map.
Group Access
ISP
Command Mode
Global Configuration
Command Line Usage
route-map <WORD> [deny | permit] [<0-65535>]
route-map <WORD> [deny | permit] [<0-65535>]
Note: If the optional sequence number [<num:0-65535>] is omitted, the
default sequence number 10 is used. If the optional access value [permit |
deny] is omitted, the default value permit is used.
These two commands create a route-map with the <route-map-name> name,
if it does not exist, and the sequence specified by the sequence number and
access value, there is no such sequence. Otherwise, the access value of the
existing sequence is set to the new access value.