Motorola BSR 64000, Reference Manual

Page: 735 / 836

BGP Commands
16-53
set comm-list
The set comm-list command deletes communities from the community attribute of an
inbound or outbound update. The no set comm-list command deletes the entry.
Use the set comm-list command to delete communities from the community attribute
of inbound or outbound updates using a route map to filter and determine the
communities to be deleted.
If the standard list is referred in the set comm-list delete command, only the elements
with the single community number or no community number in them will be used. All
others will be quietly ignored. Any element specified with the ’internet’ keyword is
equivalent to element without community number.
If the set community comm and set comm-list list-num delete commands are
configured in the same sequence of a route-map attribute, the deletion operation (set
comm-list list-num delete) is performed before the set operation (set community
comm).
Group Access
ISP
Command Mode
Route-map Configuration
Command Line Usage
set comm-list {<1-99> | <100-199>} delete
no set comm-list {<1-99> | <100-199>} delete
Note: If the set community comm and set comm-list list-num delete
commands are configured in the same sequence of a route-map attribute, the
deletion operation (set comm-list list-num delete) is performed before the
set operation (set community comm).