Mitsubishi QD75M1, User Manual

Page: 676 / 882

15 - 29
MELSEC-Q
15 TROUBLESHOOTING
Related buffer memory
address
Axis 1 Axis 2 Axis 3 Axis 4
Set range
(Setting with sequence program)
Remedy
44
45 194
195 344
345 494
495
1 to 8388608
46
47 196
197 346
347 496
497
1 to 8388608
With the setting brought into the setting range, turn the
PLC READY signal [Y0] from OFF to ON.
48
49 198
199 348
349 498
499 1 to 10000000 [PLS/s]
1 to 2000000000 [mm/min or others]
• With the setting brought into the setting range, turn
the PLC READY signal [Y0] from OFF to ON.
• Bring the setting into the speed limit value or below.
50 200 350 500 0, 1, 2, 3
51 201 351 501 0, 1, 2, 3
52 202 352 502 0, 1
53 203 353 503 1 to 100
54
55 204
205 354
355 504
505
1 to 8388608
56 206 356 506 0, 1
57 207 357 507 0, 1
58 208 358 508 0, 1
60
61 210
211 360
361 510
511
0 to 10000
62 212 362 512 0, 1, 2, 3
64
65 214
215 364
365 514
515
0 to 163840
70 220 370 520 0, 1, 4, 5, 6
With the setting brought into the setting range, turn the
PLC READY signal [Y0] from OFF to ON.