Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 272 / 361

Automatic air conditioning-Type1 (if so equipped)
Comfort controls 7-13
7
1. Set the blower speed selection dial to the
“AUTO” position.
2. Select the temperature control dial to the
desired temperature. The temperature can
be set within a range of around 61 to 89.
The temperature will increase as the dial
is turned to the right.
3. Set the mode selection dial to the
“AUTO” position.
The vents, recirculation/outside air, blower
speed, and ON/OFF of air conditioning will
be controlled automatically.
N00731800072
Blower speed and vent mode may be con-
trolled manually by setting the blower speed
selection dial and the mode selection dial to
the desired positions. To return to automatic
operation, set the dials to the “AUTO” posi-
tion.
N00732401607
To remove frost or mist from the windshield
and door windows, use the mode selection
dial (“
” or “ ”).
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the mode selection dial to the “ ”
position.
2. Select your desired blower speed by turn-
ing the blower speed selection dial.
3. Select your desired temperature by turn-
ing the temperature control dial.
NOTE
 Set the temperature at about 75 under normal
conditions.
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
dial. To prevent the windshield and windows
from fogging up, the vent mode will be
changed to “
” or “ ” and the blower
speed will be reduced.
Operating the air conditioning
system (manual mode)
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
 For ordinary defrosting
BK0265500US.book 13 ページ ２０１８年５月８日 火曜日 午後８時７分