Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 160 / 361

Lane Departure Warning (LDW) (if so equipped)
Features and controls 5-95
5
For vehicles sold in Canada
Applicable law: Canada 310
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.
Frequency bands: 24.05 - 24.25 GHz
Output power: less than 20 milliwatts
N00577900105
The Lane Departure Warning (LDW) is a
driving aid system to help prevent uninten-
tional lane departure. The LDW is designed
to read lane markers by using a sensor (A)
under certain conditions. The LDW will give
you both visual and audible warnings when
your vehicle is leaving or has left the lane.
For details about handling the sensor, refer to
“Handling of the sensor” on page 5-84.
N00578000060
To turn on the LDW, press the LDW switch.
The
indicator will appear on the informa-
tion screen of the multi-information display.
Lane Departure Warning
(LDW)
(if so equipped)
WARNING
 Never rely solely on the LDW. The LDW is
not a collision avoidance system and is not
a substitute for your safe and careful driv-
ing.
 Before using the LDW, read this entire
section to understand the limitations of
this system. Failure to follow instructions
could result in an accident.
To turn on/off the LDW
NOTE

The LDW is turned on when the vehicle is
shipped from the factory.
 The currently selected LDW setting (on or
off) is stored even when the ignition switch
is turned to the “OFF” position or the opera-
tion mode is put in OFF.
BK0265500US.book 95 ページ ２０１８年５月８日 火曜日 午後８時７分