Mitsubishi MOTORS Outlander Sport 2019, Owner'S Manual

Page: 142 / 361

Forward Collision Mitigation system (FCM) (if so equipped)
Features and controls 5-77
5
 When the active stability control (ASC)
starts operating.
Refer to “Active stability control (ASC)”
on page 5-70.
Also, the set speed driving may be deacti-
vated as follows:
 When the engine speed rises and
approaches the tachometer’s red zone (the
red-colored part of the tachometer dial).
N00518901329
If the set speed driving is deactivated by any
condition described in “To deactivate” on
page 5-76, you can resume the previously set
speed by pushing up the RES + switch (C)
while driving at a speed of about 25 mph (40
km/h) or higher.
Under either of the following conditions,
however, using the switch does not allow you
to resume the previously set speed. In these
situations, repeat the speed setting procedure:
 The CRUISE CONTROL ON/OFF
switch is pressed.
 [Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “OFF” or
“ACC” position.
[Vehicles equipped with the F.A.S.T.-key]
Put the operation mode in OFF or ACC.
 “CRUISE” indicator light is turned OFF.
N00577300082
The Forward Collision Mitigation system
(FCM) is designed to help reduce the risk of a
collision with a vehicle or a pedestrian
straight ahead of your vehicle. The FCM uses
a sensor (A) to determine the distance and
relative speed to a vehicle and a pedestrian in
front. The FCM is not designed as an auto-
matic driving system or as a collision avoid-
ance system.
When your vehicle is approaching a vehicle
or a pedestrian straight-ahead in your path
and the FCM judges that there is the risk of a
collision, the system will give audible and
visual warnings.
When the FCM judges that a collision with
the vehicle or the pedestrian straight-ahead is
imminent, the system will automatically
apply moderate braking to warn you to apply
the brakes immediately.
When the FCM judges that a collision with
the vehicle or the pedestrian straight-ahead is
highly unavoidable, the system will apply
emergency braking to reduce the severity of
WARNING
 On vehicles equipped with continuously
variable transmission (CVT), although the
set speed driving will be deactivated when
shifting to the “N” (NEUTRAL) position,
never move the selector lever to the “N”
(NEUTRAL) position while driving.
You would have no engine braking and
could cause a serious accident.
CAUTION
 When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by an authorized
Mitsubishi Motors dealer or a repair facility
of your choice.
To resume the set speed
Forward Collision Mitiga-
tion system (FCM)
(if so
equipped)
BK0265500US.book 77 ページ ２０１８年５月８日 火曜日 午後８時７分